浩瀚色譜采用"吸附管采樣—熱脫附—?dú)庀嗌V-質譜法"同時測定環境空氣中甲硫醇、乙硫醇、甲硫醚、乙硫醚和二甲基二硫醚5種有機硫化物,以樣品冷藏保存的條件下,5種有機硫化物的質量濃度分別在5.35×10-3～8.56×10-2,6.93×10-3～1.11×10-1,6.93×10-3～1.11×10-1,1.01×10-2～1.61×10-1,1.01×10-2～1.68×10-1 mg/m3的范圍內與峰面積呈良好的線性關系;當采樣體積為10 L時,方法檢出限為1.13×10-3～2.80×10-3 mg/m3,相對標準偏差為2.76％～7.73％,加標回收率為78.5％～106.0％.對實際樣品的測定結果與GB/T 14678—1993方法無顯著性差異.

　　本方法適用于惡臭污染源排氣和環境空氣中硫化氫、甲硫醇、甲硫醚和二甲二硫的同時測定。氣相色譜儀的火焰光度檢測器（GC-FPD）對四種成分的檢出限為0.2╳10-3～1.0╳10-3g，當氣體樣品中四種成分濃度高于1.0mg/m3時，可取1～2mL氣體樣品直接注入氣相色譜儀分析。對1L氣體樣品進行濃縮，四種成分的方法檢出限分別為.2╳10-3～1.0╳10-3mg/m3。

　　名稱:硫化物測定專用柱

　　型號:XY-Sulfur

　　規格:3m*2mm（ID）*3mm(OD)

　　*高使用溫度:120°C

　　編號:20240513009

　　應用；GB/T 14678-93空氣質量 硫化氫、甲硫醇、甲硫醚和二甲二硫的測定 氣相色譜法

　　適用于安捷倫6890,7890,7820,8860,8890

　　Haohan Chromatography uses "adsorption tube sampling thermal desorption gas chromatography-mass spectrometry" to simultaneously determine 5 organic sulfides in ambient air, including methyl mercaptan, ethyl mercaptan, methyl sulfide, ethyl sulfide, and dimethyl disulfide. Under the condition of sample refrigeration, the mass concentrations of the 5 organic sulfides show a good linear relationship with peak area within the range of 5.35 × 10-3 to 8.56 × 10-2, 6.93 × 10-3 to 1.11 × 10-1, 6.93 × 10-3 to 1.11 × 10-1, 1.01 × 10-2 to 1.61 × 10-1 mg/m3, respectively; When the sampling volume is 10 L, the detection limit of the method is 1.13 × 10-3~2.80 × 10-3 mg/m3, the relative standard deviation is 2.76%~7.73%, and the spiked recovery rate is 78.5%~106.0%. There is no significant difference between the actual sample measurement results and the GB/T 14678-1993 method

　　This method is applicable for the simultaneous determination of hydrogen sulfide, methyl mercaptan, methyl sulfide, and dimethyl disulfide in the exhaust of odor pollution sources and ambient air. The detection limit of the flame photometric detector (GC-FPD) of the gas chromatograph for the four components is 0.2 × 10-3~1.0 × 10-3g. When the concentration of the four components in the gas sample is higher than 1.0mg/m3, 1-2mL of gas sample can be directly injected into the gas chromatograph for analysis. Concentrate 1L of gas sample, and the detection limits for the four components are. 2 × 10-3~1.0 × 10-3mg/m3, respectively.

　　Name: Special column for sulfide determination

　　Model: XY-Sulfur

　　Specifications: 3m * 2mm (ID) * 3mm (OD)

　　*High operating temperature: 120 ° C

　　Number: 20240513009

　　Application; GB/T 14678-93 Air Quality - Determination of Hydrogen Sulfide, Methylthiol, Methyl Sulfide and Dimethyl Disulfide - Gas Chromatography Method

　　Applicable to Agilent 68907890782088608890