美國Heli-Coil進口工具件4238-5江蘇總經銷中國區(qū)代理商無錫市阿曼達機電有限公司
品牌:美國Heli-Coil
型號:進口工具件4238-5 HELI-COIL TANG斷線工具公制粗（3695-04多款料號和價格可選）
Heli-Coil
M5螺紋插入柄斷線工具
公制粗螺紋標準
Heli-Coil
M5 Thread Insert Tang Break Off Tool
Metric Coarse Thread Standard
HELI-COIL
Tool And Tap
Selection Guide
For Tanged Inserts
HELI-COIL
工具和水龍頭
選型指南
對于纏結刀片
MFG # 4238-5, HELI-COIL TANG BREAK-OFF TOOLS METRIC COARSE
More
The driving tangs of Heli-Coil inserts must be removed to eliminate their interference with the
end of the assembled bolt. Heli-Coil tang break-o tools are available for use with inserts
through 1/2 inch and 12mm metric nominal diameter. Their operation is automatic, having a
spring loaded, easily triggered punch that strikes a sharp, uniform blow against the tang of the
installed insert. The tool can be operated with one hand..
Note: Tang break-o tools will break- o tangs thru 2 diameter
MFG＃4238-5，HELI-COIL TANG斷線工具公制粗
更多必須去除Heli-Coil刀片的驅動柄，以免干擾
組裝螺栓的末端。 可使用Heli-Coil tang拆卸工具與刀片一起使用
公稱直徑為1/2英寸和12mm。 他們的操作是自動的，
彈簧加載，容易觸發(fā)的打孔器，對著槍管的柄部進行均勻，均勻的打擊
安裝的插件。 該工具可以用一只手操作。
注意:Tang折斷工具將通過2個直徑折斷tangs。
Heli-Coil進口工具件4238-5產品價格參數(shù)和圖片說明:
Helicoil 4238-5
4238-5 M5X0.8 H-COIL MTR.BREAK OFF TOOL
Mfr Description: 4238-5 AUTO.TBO TOOL M5X0.8
Heli-Coil
M5 Thread Insert Tang Break Off Tool
4238-5
Heli-Coil
#4-40, #4-48 and #5-40 Thread Insert Tang Break Off Tool
UNC and UNF Thread Standard
3695-04
Heli-Coil
#10-24, #10-32 and #12-24 Thread Insert Tang Break Off Tool
UNC and UNF Thread Standard
3695-3
Heli-Coil
#6-32, #6-40 Thread Insert Tang Break Off Tool
UNC and UNF Thread Standard
3695-06
Heli-Coil
1/4-20 and 1/4-28 Thread Insert Tang Break Off Tool
UNC and UNF Thread Standard
3695-2
Heli-Coil
#2-56, #3-48 and #3-56 Thread Insert Tang Break Off Tool
UNC and UNF Thread Standard
3695-02
Heli-Coil
M6 Thread Insert Tang Break Off Tool
Metric Coarse Thread Standard
4238-6
Heli-Coil
M3 Thread Insert Tang Break Off Tool
Metric Coarse Thread Standard
4238-3
Heli-Coil
3/8-16 Thread Insert Tang Break Off Tool
UNC Thread Standard
3695-6
Heli-Coil
M4 Thread Insert Tang Break Off Tool
Metric Coarse Thread Standard
4238-4
Heli-Coil
M8 Thread Insert Tang Break Off Tool
Metric Coarse and Fine Thread Standard
4238-8
Heli-Coil
1/2-13 Thread Insert Tang Break Off Tool
UNC Thread Standard
3695-8
Recoil
#4-40 and #4-48 Thread Insert Tang Break Off Tool
UNC and UNF Thread Standard
59081